Card 80 - Damage Measurements – Veh1
CDC.1 |
L.1 |
D.1 |
C1.1 |
C2.1 |
C3.1 |
C4.1 |
C5.1 |
C6.1 |
|
80 |
Card: Field |
Variable |
|
Description |
Original
Units |
Metric Units |
|
|
|
Damage Measurements for Vehicle No. 1
This card is used to input the Collision
Deformation Classification (CDC, per SAE J224 MAR80) and the
Equidistant Crush Measurement (ECM, per SAE J2433)
|
|
|
80:1 |
CDC.1 |
|
7 Character code which classifies the extent and
location of the vehicle damage. See SAE J224 MAR80 for further
information. |
|
|
|
|
|
The following measurements describe the
vehicle damage region per SAE J2433.
|
|
|
80:2 |
L.1 |
|
The Length (or width) of the damage region.
Normally should only include direct damage. Some techniques include
induced damage as well. |
Inches |
cm |
80:3 |
D.1 |
|
The offset of the midpoint of the damage region
from the Vehicle Center of gravity. Looking at the top view of the
vehicle, measured as + forward or to the right, - rearward or towards the
left. |
Inches |
cm |
|
|
|
The following crush depth measurements are
input as 2, 4 or 6 points.
|
|
|
80:4 |
C1.1 |
|
Crush depth measurement No. 1 |
Inches |
cm |
80:5 |
C2.1 |
|
Crush depth measurement No. 2 |
Inches |
cm |
80:6 |
C3.1 |
|
Crush depth measurement No. 3 |
Inches |
cm |
80:7 |
C4.1 |
|
Crush depth measurement No. 4 |
Inches |
cm |
80:8 |
C5.1 |
|
Crush depth measurement No. 5 |
Inches |
cm |
80:9 |
C6.1 |
|
Crush depth measurement No. 6 |
Inches |
cm |
More:
Card 85 - Damage Measurements -
Veh2