CDC.2 |
L.2 |
D.2 |
C1.2 |
C2.2 |
C3.2 |
C4.2 |
C5.2 |
C6.2 |
|
85 |
Card: Field |
Variable |
|
Description |
Original Units |
Metric Units |
|
|
|
Damage Measurements for Vehicle No. 2 This card is used to input the Collision Deformation Classification (CDC, per SAE J224 MAR80) and the Equidistant Crush Measurement (ECM, per SAE J2433)
|
|
|
85:1 |
CDC.2 |
|
7 Character code which classifies the extent and location of the vehicle damage. See SAE J224 MAR80 for further information. |
|
|
|
|
|
The following measurements describe the vehicle damage region per SAE J2433.
|
|
|
85:2 |
L.2 |
|
The Length (or width) of the damage region. Normally should only include direct damage. Some techniques include induced damage as well. |
Inches |
cm |
85:3 |
D.2 |
|
The offset of the midpoint of the damage region from the Vehicle Center of gravity. Looking at the top view of the vehicle, measured as + forward or to the right, - rearward or towards the left. |
Inches |
cm |
|
|
|
The following crush depth measurements are input as 2, 4 or 6 points.
|
|
|
85:4 |
C1.2 |
|
Crush depth measurement No. 1 |
Inches |
cm |
85:5 |
C2.2 |
|
Crush depth measurement No. 2 |
Inches |
cm |
85:6 |
C3.2 |
|
Crush depth measurement No. 3 |
Inches |
cm |
85:7 |
C4.2 |
|
Crush depth measurement No. 4 |
Inches |
cm |
85:8 |
C5.2 |
|
Crush depth measurement No. 5 |
Inches |
Cm |
85:9 |
C6.2 |
|
Crush depth measurement No. 6 |
Inches |
Cm |
|
|
|
|
|
|
More: